Laurel-electronics Custom ASCII Protocol For Laureate Series 2 Digita Bedienungsanleitung PDF herunterladen (Seite 52)

0 0 0 300 baud

0 0 1 600 baud

0 1 0 1200 baud

0 1 1 2400 baud

1 0 0 4800 baud

1 0 1 9600 baud

1 1 0 19200 baud

0 Send Unfiltered Value

1 Send Filtered Value

32 (L) Serial Cnfg2 Bit 7 6 5 4 3 2 1 0

X X X X X Binary Custom ASCII addr. 0-31

0 Continuous Mode

1 Command Mode

0 Alarm data not included with rdg.

1 Alarm data included with rdg.

0 No <LF> Following <CR>)

1 <LF> Following <CR>

6A (L) Serial Cnfg3 Bit 7 6 5 4 3 2 1 0 Data Sent:

0 0 0 Net + Gross

0 0 1 Net Only

0 1 0 Gross Only

0 1 1 Peak Only (Net or Gross)

1 0 0 Net + Gross + Peak

0 <CR> or <CR><LF> at end of all Items

1 <CR> or <CR><LF> at end of each Item

(if no Alarm character)

0 Non-latching RTS

1 Latching RTS

0 Normal Cont Serial TX

1 Special Start, Stop Characters

0 Full Duplex

1 Half Duplex

00 (U) Serial Cnfg4 Bit 7 6 5 4 3 2 1 0 Serial Protocol

0 0 No Parity

0 1 Odd Parity

1 0 Even Parity

0 0 Laurel ASCII (8 Bits, No Parity)

0 1 Modbus RTU Protocol (8 Bits)

1 0 Modbus ASCII Protocol (7 bits)

0 0 1 s Modbus ASCII Gap Timeout

1 2 ... 47 48 49 50 51 52 53 54 55 56

Keine Kommentare

Laurel-electronics Custom ASCII Protocol For Laureate Series 2 Digita Bedienungsanleitung Seite 52