Laurel-electronics LTS6 - Manual Bedienungsanleitung PDF herunterladen (Seite 16)

- 16 -

A deviation band alarm controls relay action symmetrically around a setpoint. The relay actuates

when the reading falls within the deviation band, and de-actuates when the reading falls outside. A

deviation value (such as 50 counts) is set up around both sides of the setpoint to create the

deviation band. Passbands around a setpoint are often used for component testing.

Control Input 1 causes a master reset when tied to ground if selected to do so with the

Control

Inputs

drop-down box under the

Relay Alarms

tab. This resets latched alarms and the analog

output. Control Input 2 is not used with the serial input transmitter.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Laurel-electronics LTS6 - Manual Bedienungsanleitung Seite 16